The best value for money to replace a defective Bubendorff 10 Nm roller shutter motor of a Mono and Tradi ID shutter installed from 1998 to 2010.
The CI Bubendorff motorization, with a torque of 10Nm (CI10) is sold with its wall-mounted radio transmitter, also commonly called remote control, already paired in the factory (cannot be sold separately).
The 20 Nm and 30 Nm CI1 motors must be replaced automatically by the RG motors with a torque of 25 for 20 and 33 for 30 with flange adapter head ID 1.2 and 2.0.
100% original Bubendorff spare part
Note: the CI radio engine works exclusively with an ID radio transmitter labeled with the same S/N number.
Bubendorff no longer sells an electronic card alone, therefore you must change the motor if you have broken the card.
All Bubendorff radio motors are now delivered with a factory-paired 3-button remote control:
White square boxes (with gray or white central square) as well as rectangular 2-button remote controls (see image below) are no longer available for motors purchased after September 01, 2019.
The CI radio engine in this product sheet has flexible lamella (2.0) connections.
If your motor has a 1.2 connector with rigid lamella, it will be necessary to order a pair of ID1 flanges in addition.
(See Motor Frequently Asked Questions (FAQ) at the bottom of the product page for more information).
But if you have a 10 Nm MONO ID1 shutter (with aluminum box) equipped with 1.2 side panels, we advise you to choose the 10 Nm Bubendorff RG radio motor with 1.2 adapter.
Even if it is more expensive, it will be easier for you to install it and you will have the latest generation of Bubendorff radio engine.
To avoid errors, we offer verification with the SN number, with the flange, and with the engine torque.
If you check these three technical criteria, you are sure that the CI10 Nm motor is the motor for you.
1) The year (the first 2 digits of the S/N number 07 8 12345 001 001 67)
the motor will be compatible with your shutter is this reference: RG 10 Nm motor with adaptation for shutter dating from before 1998
2) The range (the 3rd digit of the S/N number 07 812345 001 001 67)
With the exception of the Bloc range (the 3ᵉ digit of the S/N number 07 4 12345 001 001 67) between 1996 and 2004 see the sheet corresponding to this exception: Engine for Bloc range
Choosing the right Bubendorff roller shutter spare parts
To know the free reference to order, we are here.
Complete your request in a few clicks and within 2 hours maximum, we will get back to you (except Sundays).
1) IC motor connector can help you.
1998 was a pivotal year for Bubendorff connections. This is why customers who have shutters whose SN number begins with 98 (S/N 98 812345 001 001 67) must imperatively check the connectors in order not to make any mistakes.
If your connectors are in 1.2:
you must order the RG 10 Nm motor with adaptation for shutters dating from before 1998
your motor connector does not have a drawer termination :
then you must order the RG 10 Nm Motor without a drawer adapter
2) The motor cheek is also to be checked. As there are two types of connectors, there are necessarily 2 types of motor cheeks.
If your motor flange has the connector, otherwise you must order the RG 10 Nm motor with adaptation for shutters dating from before 1998
Be careful if you decide to take a 25 nm when your shutter is less than 5 m², you will break some parts of your shutter.
2 solutions are possible:
1) If you currently have a centralization (group of shutters) then go on a radio protocol engine AND carrier current.
Take this reference (sold with its radio transmitter):
RG 25Nm motor with 2.0 adapter
2) If you just want a motor with individual radio protocol control only.
Take this reference (sold with its radio transmitter):
This bubendorff 10nm radio engine is in stock. If you are in a hurry, remember to select delivery with Chronopost to have it the next day (if your order is placed before 12 noon).
It has a 5 year warranty.
If you have the slightest doubt about the type or power to choose, requests for Bubendorff accessories are made directly by indicating the serial number of your roller shutter (S/N).
You will receive an email from our team with the products and prices to replace the faulty parts. Also find the many customer reviews to help you.
Moteur radio CI - 10N Bubendorff
Présentation du moteur radio CI - 10N de la marque Bubendorff
- Comment
Livraison rapide
- Advantages
- Disadvantages
- Comment
- Advantages
- Comment
- Comment
Aide technique pour le démontage et remontage.
- Advantages
- Disadvantages
- Comment
- Advantages
- Disadvantages
- Comment
Plusieurs échanges téléphoniques et par mail ont permis d'apporter des réponses à toutes mes questions.
Commande reçue dans les délais et correspondant à mes besoins.
- Advantages
Excellent au niveau livraison et conseils sur le produit à commander.
Je reviendrais dès que j’aurais besoin .
Cordialement
Alain spinati
- Comment
- Comment
a l'occasion je resterai client.
- Advantages
- Comment
- Advantages
- Disadvantages
- Comment
Vous avez une question pour réparer votre volet roulant ?
Vous ignorez quelle référence Bubendorff choisir ? Demandez à notre équipe (réponse en 30 min)
