The best value for money to replace a defective Bubendorff 10 Nm roller shutter motor of a Mono and Tradi ID shutter installed from 1998 to 2010.

The CI Bubendorff motorization, with a torque of 10Nm (CI10) is sold with its wall-mounted radio transmitter, also commonly called remote control, already paired in the factory (cannot be sold separately).

The 20 Nm and 30 Nm CI1 motors must be replaced automatically by the RG motors with a torque of 25 for 20 and 33 for 30 with flange adapter head ID 1.2 and 2.0.

100% original Bubendorff spare part

• CI type individually controlled BUBENDORFF radio engine
• Torque: 10 Newtons
• 16 rpm (16 revolutions per minute)
• Radio remote control and centralization via carrier current protocol (CPL)
• Automatic limit switches
• Head shape: drawer - connectors 2.0
• Delivered with its wall-mounted radio transmitter (223026).
• ref: 221008

White square boxes (with gray or white central square) as well as rectangular 2-button remote controls (see image below) are no longer available for motors purchased after September 01, 2019.

What is the connection of the CI Bubendorff motor?

The CI radio engine in this product sheet has flexible lamella (2.0) connections.

If your motor has a 1.2 connector with rigid lamella, it will be necessary to order a pair of ID1 flanges in addition.

(See Motor Frequently Asked Questions (FAQ) at the bottom of the product page for more information).

But if you have a 10 Nm MONO ID1 shutter (with aluminum box) equipped with 1.2 side panels, we advise you to choose the 10 Nm Bubendorff RG radio motor with 1.2 adapter.

Even if it is more expensive, it will be easier for you to install it and you will have the latest generation of Bubendorff radio engine.

How to ensure compatibility with the CI engine?

To avoid errors, we offer verification with the SN number, with the flange, and with the engine torque.

If you check these three technical criteria, you are sure that the CI10 Nm motor is the motor for you.

I. The verification with the SN number of your shutter is indicated on the last blade of this one

1) The year (the first 2 digits of the S/N number 07 8 12345 001 001 67)

• If your cover dates from after 1998 then you can go to the next step and check your range number.
• If your shutter dates from before 1998 and you are sure you have never changed the motor, so this type of motor is not compatible,

the motor will be compatible with your shutter is this reference:  RG 10 Nm motor with adaptation for shutter dating from before 1998

2) The range (the 3rd digit of the S/N number 07 812345 001 001 67)

• If the Range number is 8 you can go to part 2 to check the motor connections.
• If the Range number (or shutter model as above) is different from 8 then the motor reference is very likely not to be that of this page!

With the exception of the Bloc range (the 3ᵉ digit of the S/N number 07 4 12345 001 001 67) between 1996 and 2004 see the sheet corresponding to this exception:  Engine for Bloc range

II. Verification with the motor connector or the motor flange

1) IC motor connector can help you.

1998 was a pivotal year for Bubendorff connections. This is why customers who have shutters whose SN number begins with 98 (S/N  98  812345 001 001 67) must imperatively check the connectors in order not to make any mistakes.

• If your connectors are in 1.2:
  you must order the RG 10 Nm motor with adaptation for shutters dating from before 1998

• your motor connector does not have a drawer termination  :
  then you must order the  RG 10 Nm Motor without a drawer adapter

2) The motor cheek is also to be checked. As there are two types of connectors, there are necessarily 2 types of motor cheeks.

• The first dating from before 1998 specific to the 1.2 drawer connectors
• The second dating from after 1998 specific to drawer 2.0 connectors

If your motor flange has the connector, otherwise you must order the  RG 10 Nm motor with adaptation for shutters dating from before 1998

This bubendorff 10nm radio engine is in stock. If you are in a hurry, remember to select delivery with Chronopost to have it the next day (if your order is placed before 12 noon).

It has a 5 year warranty.

If you have the slightest doubt about the type or power to choose, requests for Bubendorff accessories are made directly by indicating the serial number of your roller shutter (S/N).

You will receive an email from our team with the products and prices to replace the faulty parts. Also find the many customer reviews to help you.