Product reference: 221183 (Left motor) / 221182 (Right motor) - for CLASSIC, Nelto and design range
Replaces product references: 221032 (Left motor) / 221023 (Right motor) + rectangular 2-button remote control
The R radio motor cannot be centralized with other shutters if you are replacing a motor in an existing shutter installation that was operating with a carrier current protocol (centralization via the electrical network).
On the other hand, this motor is potentially centralizable using the radio protocol of the motor, this means that the motors of your roller shutters having been replaced by motors of this same type R (radio protocol) can be centralized with one of the following Bubendorff radio remote controls :
If you want the motor to be replaced to be immediately compatible with your current centralization, then take the RG motor.
Yes, the R radio motor can replace a wired motor. Notably the FG type 3-wire motors which are no longer manufactured by Bubendorff.
To do this, you must remove the motor inverter built into its wall-mounted electrical box, ensure the electrical connection so that the neutral and the phase go directly to the motor. The 3rd wire can be removed or protected.
If you want to keep the wall switch, an option allows you to take the square radio remote control with a gray or white central square and fix it to the existing electrical box instead of the old inverter.
The steps for switching from a wired FG/MG motor to an R or RG motor are available in the downloadable instructions in the "Attached files" tab
R motors are now available in 10 Nm, 25 Nm and 33 Nm torque. If 6 or 10 Nm is marked on your motor, you can be sure that the 10 Nm motor will be suitable. If it is registered 20 or 25 Nm, you can take the 25Nm motor and if it is registered 30 or 33 Nm then orient yourself on the 33 Nm.
It is not advisable to take a torque higher than that which is in place. In fact, as the engine is stopped by force at the level of the high and low stops, you risk breaking the fasteners of the apron (called automatic locks) of the shutter on their axis, or even damaging the blades of the apron.
However, if you want to increase the torque of your motor, remember to add one or two pairs of automatic locks to your order.
If you have any doubts about the engine torque in place, do not hesitate to send us a request with the SN number of the shutter either by chat (bottom right) or via our form.
All the disassembly and assembly steps are given in the downloadable instructions in the "Attached files" tab.
The warranty is valid for 5 years from the engine invoice date. If your engine requires a warranty claim, you can contact our services, the engine must then be returned with its transmitter. You will need to ensure beforehand that the engine has not been damaged.or has not suffered an electrical surge. Indeed, in the last 2 cases mentioned, it is not an engine fault and the manufacturer will not apply the guarantee.
Don't worry, this motor model is compatible with your shutter, you will just have to drill the metal shaft further to rivet it, be careful not to drill the motor, the guarantee would be inapplicable.
All Bubendorff radio motors are sold with a transmitter previously paired in the factory with the motor, your old transmitter will not be able to control this new motor under any circumstances, and if you need an additional control, you will have to add a transmitter to your order. additional removable.
No, powering up and setting the shutter to the upper and lower stops will allow it to initialize on its own, if you do not want the shutter to stop at the upper stop automatically, it will then be possible to configure it (only the top stop can be configured).
The upper stop adjustment steps are available in the downloadable instructions in the "Attached files" tab.
- Advantages
- Disadvantages
- Comment
- Advantages
- Comment
- Advantages
- Disadvantages
- Comment
- Advantages
- Comment
- Advantages
- Comment
- Advantages
- Comment
- Advantages
les moteurs s'adaptent parfaitement
- Disadvantages
- Comment
Nous sommes très satisfait et on va reprendre 3 moteurs bientot pour anticiper les pannes à venir des 3 derniers volets de la maison.
- Comment
Produit recu dans les temps.
Le top !
- Advantages
- Disadvantages
- Comment
Pas encor monté et testé
- Advantages
Je suis entièrement satisfaite.
Je recommande.
- Comment
Je suis entièrement satisfaite.
Je recommande
Vous avez une question pour réparer votre volet roulant ?
Vous ignorez quelle référence Bubendorff choisir ? Demandez à notre équipe (réponse en 30 min)
