SOMFY Oximo IO radio motor - 06 Nm short - Somfy

221126 - SOMFY Oximo IO radio motor - 06 Nm short-Somfy

• Supplied with white VVF cable of 3 linear meters with 3 conductors (see technical documentation at the bottom of the product page)
• IP44 protection
• Power supply 230V // Frequency 50Hz
• The Motor is CE marked (It therefore meets certain technical standards and acquires the right of free movement in the EU) and NF (The product complies with safety and quality characteristics)
• Please note that the motor is delivered without adaptation (wheel and/or crown), without IO transmitter or support. It is possible to add a Telis 1 IO pure SOMFY transmitter by clicking here or a Smoove origin IO switch by clicking here or by going to the bottom of this product page.
• To be installed in a tube positioned horizontally

Somfy motors combine comfort with safety on a daily basis.

For all questions concerning the differences between RTS & IO motors, please go to the following page: Advice sheet - Which Somfy motor to choose between IO-Homecontrol and RTS?

Oximo IO engine to control your home:

Technical characteristics :

The short Somfy Oximo IO 06 Nm motor is approximately 37cm long.

• Limit switch adjustment automatic or configurable by io transmitter:
• Electronic limit switch cage

The "AutoScan" function allows the motor to be adjusted individually without double power failure (handling required on RTS motor)

• 4 different setting modes:

1. manual
2. high semi-automatic
3. low semi-automatic
4. fully automatic (if locks + stops).

• Possibility of settlinge a favorite position.
• Integrated io radio receiver.
• Tri-frequency radio io 868-870Hz with re-transmission of the order up to 8 times.
• Delivered with a cable, without adaptation, without support and without io transmitter.
• reinforced security thanks to a 128-bit encryption key exclusive to each engine.
• In order to guarantee the sending of orders, there can be up to 8 repetitions of the order if necessary.
• Confirmation of the correct execution of your request via a green LED (Example: confirmation of lowering of your roller shutter). It is also possible to observe feedback from the motor in the programming phase by movement of the curtain.
• Monitoring of the real-time operation of the installation.
• Permanent electronic analysis of the motor to adapt to changes in the shutter over time via the "Somfy drive Control" function
• IO protocol associated with many renowned brands see article Advice sheet - Which Somfy motor to choose between IO-Homecontrol and RTS? for more detail.
• Compatible with the Sunis Wirefree IO sun sensor for front sun protection.
• Compatible with the TAHOMA ® Home Automation Box which allows you to control the equipment in your home.

Data sheet: Need help determining your engine? Contact us or download this document

Useful documents:

Why choose Somfy?

1) Everyday comfort

• The shutters respond to you with a single gesture.
• It is possible to program a favorite position for your roller shutter.
• Possibility of controlling your Oximo IO motors from your smartphone or tablet at the place of installation or remotely via the Tahoma home automation box.

2) Security

• Thanks to the Bi-directional protocol, your motor confirms to the transmitter that the action has been performed.
• In the event of a break-in, resistance to lifting your shutter.
• Possibility of presence simulation by programming via a radio clock times for raising and lowering your shutters.

3) Roller shutter protection

• Optimization of the life of your shutters thanks to a smooth motorization.
• In the event of frost or an obstacle, the motor has an automatic stop function.

4) Energy saving

• In winter, the use of a clock can save you money on your heating bill by automatically lowering the shutters and therefore reinforcing the insulation of the windows.
• In summer, with a sun sensor your shutters can lower automatically to keep cool and protect your home from the sun's rays.

5) French design

6) 5 year manufacturer warranty