How to replace the battery of a Bubendorff remote control?

This operation is very accessible. Just take a small flat screwdriver. Don't stay with a broken transmitter, the problem is fixed in seconds.

Changing the Bubendorff switch battery: 3 simple steps to follow

1. Opening the case

Using a screwdriver, carefully open the remote control. Insert it into the notch on the side, which corresponds to the two parts of the remote control. No need to force, it is done quite easily.

2. Changing the battery

Collect the old HS battery and position the replacement (reference CR 2032 for new remote control models). To help you get it out, use the flat screwdriver.

Important: the "+" sign must be on the upper side, i.e. facing you when you make the change.

The old battery must be taken to a collection point, never put it in the trash! It contains polluting substances. Most supermarkets or recycling centers install a bin for this purpose.

The list of all recycling points is available on COREPILE .

3. Closing the case

Nest the two plastic parts together to assemble them. Remember to check that the red light comes on and that the shutter control operates normally.

Our new video shows the whole operation.

Check that the motor of your roller shutter starts moving (one way up and one way down). If despite replacing the battery, the shutters do not move, I invite you to read the cases presented below.

Changing the battery has no effect on limit switch adjustment.

Frequently asked questions about changing a Bubendorff transmitter battery

What are the symptoms of a Bubendorff roller shutter remote control that no longer works?

If the box is in good condition, you just have to check that the red LED located above the "Bubendorff" button lights up.

If there is no response, the first thing to check is the battery. With the procedure described previously, you can extract it to check its voltage with a tester or a multimeter.

A new battery displays 3 V. If this data is good, the failure is more serious: you should probably consider replacing the remote control.

How do I recognize my type of Bubendorff roller shutter remote control?

If your remote control has a 16-digit serial number, it is a radio individual control. It is connected with a single shutter

Conversely, if there is no number, it is a grouped remote control . It is able to control a group of roller shutters for more comfort.

Where to buy Bubendorff remote control batteries?

CR2032 batteries are available in supermarkets, DIY stores or on lacentrale-eco.com in packs of 20.

Where can I find the instructions for my remote control?

THEhref="https://solar.bubendorff.com/wp-inside/uploads/2021/03/vr-and-mvb-14-user-guide-guide.pdf" target="_blank">complete manufacturer user guide is available online. All the information is gathered in this very complete user manual.

In addition, we also invite you to discover our articles on the Bubendorff universe:

• How to install an additional remote control ?
• How to configure the Bubendorff preferential position ?
• Choosing your Bubendorff remote control ?

The final word

As you may have discovered, this repair is very simple.

For any questions, our team is at your disposal. We are specialists in Bubendorff roller shutters. In addition, we have more than 1000 accessory references in stock (engine in particular).

In addition, we offer delivery within 24 hours with Chronopost if you place an order before 12 noon. Last point, if you have any doubts about a model to order, we can identify it with the serial number of your roller shutter . Response within 2 hours, Monday to Saturday.