- Back to top
- Description
- Options details
- Features
- Customer reviews
DOUBLE FLOW VENTILATION RENOVENT EXCELLENT 400 BY BRINK CLIMATE SYSTEMS
The RENOVENT EXCELLENT 400 double flow ventilation is the same ventilation model as the RENOVENT EXCELLENT 300 double flow ventilation . It is suitable for larger dwellings (up to 600m3) or for medium-sized dwellings for which nighttime overventilation is managed by the VMC rather than by opening the windows (typically for houses close to roads or other noise areas). ).
The dimensions of the ventilation box are the same (765 x 675 x 564 mm) and the connection of the ducts is done in DN180. The box is equipped with more powerful motors and will be quieter at the same flow rate than the RENOVENT 300.
The corresponding new generation of BRINK double flow ventilation is the FLAIR 400 model.
The RENOVENT EXCELLENT 400 is PHI certified (for passive house)
In line with these high-quality products, our team systematically validates your installation, which we optimize for you. Send us your request by clicking on the link below. A technician will call you back to learn about your project, advise you and carry out your costing for free.
BRINK ventilation units are guaranteed for 5 years*
*Subject to commissioning by an authorized Brink technician
ADVANTAGES OF THE RENOVENT EXCELLENT 400 BY BRINK:
The VMC double flow RENOVENT EXCELLENT 400 is the same model in more powerful than the VMC double flow RENOVENT EXCELLENT 300 in more powerful and presents the same advantages .
TECHNICAL CHARACTERISTICS :
Nominal / max flow | 50 / 400 m3/h - For housing up to 600 m3 | |||||||||||||||||
Fan operation | Constant flows-de-vmc-double-flux.html">(More details) | |||||||||||||||||
Certified exchanger efficiency | 84% (PHI certified) | |||||||||||||||||
Fan consumption | 0.29 Wh/m3 (PHI certified) | |||||||||||||||||
Subwoofer acoustics | 51.5 dB(A) (PHI certified) | |||||||||||||||||
Assembly | Vertical | |||||||||||||||||
Dimensions (HXLXP) | 765 x 677 x 564mm | |||||||||||||||||
Connection | DN 180 (above / below) | |||||||||||||||||
Condensate evacuation | Exit at the bottom | |||||||||||||||||
Filtration | 1x G3 / 1x G3 (1x G4 / 1x F7 optional) | |||||||||||||||||
Frost protection | Electric pre-heater as standard | |||||||||||||||||
Regulation | 3 or 4 position selector wired or wireless or Control module with clock | |||||||||||||||||
Option(s) | Enthalpy exchanger / CO2 sensor and humidity sensor on duct / pre and/or post heating | |||||||||||||||||
bypass | Automatic, adjustable | |||||||||||||||||
Material | Thermo-lacquered galvanized steel for the outer casing. Polypropylene (PP) inside. | |||||||||||||||||
Weight | 38kg | |||||||||||||||||
Certificate | PHI | |||||||||||||||||
Guarantee | 2 years by default / 5 years under conditions |
Options Details
The 4 position selector is a wired manual control box connected by an RJ12 cable (included in the kit) with:
Air Control is an electronic regulation box with a weekly clock that can be programmed on demand. This control box allows access to all the machine settings in a remote way (installer and user menu available to read the states, to parameterise them or to solve the errors noticed). The airflow rates can be modulated manually or via the weekly programmable on-demand regulation.
.This radio control kit allows remote control between:
The DN32 wet siphon is a conventional siphon that is installed after the dry siphon and when primed maintains the airtight seal to the wastewater system and protects the electronics from condensate build-up inside the machine.
Dry siphon DN32mm. Brink's dry siphon is equipped with a ball that allows condensate to pass in one direction but does not allow air to pass in the other. This ensures a seal against the waste water system, protection of the machine and optimum machine efficiency without the risk of de-priming.
.The 60% IC filter (G4) protects the fan from the coarsest particles in the indoor air.
In winter, the enthalpy exchanger transfers part of the humidity present in the extracted air of the house to the fresh and dry air blown in. The enthalpy exchanger thus makes it possible to maintain a sufficiently comfortable relative humidity level in the dwelling while continuing to ventilate in an important way.
- A+
- 51.5 dB(A) (PHI certified)
- 2 years - 5 years conditionally
Left version:
- Managing the air flow inside the home is done with the left fittings.
For model 2/2 the left fittings are at the bottom of the VMC.
- The air passage outside the home is managed with the right-hand fittings.
Right version:
- The air passage inside the house is managed with the right-hand fittings.
For model 2/2 the right fittings are at the bottom of the VMC.
- Managing the air flow outside the home is done with the left fittings.
- Between 450 and 500 m3
- Between 500 and 600 m3
- DN 180
No reviews found