Kit VMC simple flux EasyHOME® HYGRO Premium MW (Micro Watt) & HP (Haute Pression) - ALDES

Description of EasyHOME® HYGRO Premium MW & HP hygro-adjustable single-flow ventilation

The EasyHOME Hygro Premium Micro-Watt or High Pressure humidity-controlled single-flow CMV has been specially designed to meet the requirements of RT2012 in new single-family homes. It is equipped with a latest generation micro-watt constant pressure motorization which reduces the consumption of electricity linked to ventilation to a minimum.

This type of ventilation renews the air in the house only according to the humidity level detected at the level of the vents. If the air is humid, the ventilation openings open, the air flow is increased and the building is protected against the appearance of mold. If the air becomes dry again, the vents close, the airflow decreases and saves energy related to heating the cold air entering the house.

This EasyHOME humidity sensitive ventilation system gives very good results in terms of the RT2012 regulatory calculation but has the major drawback of not adapting the air renewal in the event of specific pollution linked to CO2 or VOC (volatile organic compounds). If you want good indoor air quality in the home, you should therefore favor a single flow system such as EasyHOME PurAIR or a double flow ventilation system.

Available in a compact version for ceiling, floor or wall installation.

Which model to choose between the EasyHOME Hygro Premium MW unit and the EasyHOME Hygro Premium MW HP unit?

The only difference between the VMC EasyHome hygro adjustable Premium MW and HP comes from the fan:

• For the MW (Micro watt) version, there is only one rotation speed. This model is designed for short network installations. Typically the case for individual single-storey houses whose ventilation unit is located in the attic. The networks are all of lengths less than 6m either in insulated flexible network placed on the insulation or in insulated semi-rigid HDPE sheath for the part located above the insulation of the roof spaces.
• For the HP version (High pressure), 2 pressure levels therefore 2 types of rotation speed are possible. This model is preferred for large houses, two-storey houses with long and winding networks. In this case, it is advisable to favor the semi-rigid HDPE network (insulation to be provided in cold volumes). In large house configurations, the installer must imperatively provide for commissioning with measurement of network pressure drops at the outlets using a manometer.

Although equipped with low consumption fan technology, the EasyHOME Hygro premium HP model will consume more electricity than the Premium MW model: 11.9 W-Th-C against 7.3 W-Th-C for an F4 with a bathroom and a separate toilet, i.e. 60% higher electricity consumption.

Advantages

• Ideal for large houses: 1 kitchen and up to 7 connected toilets and possibility of connecting 2 toilets in line on the second connection Ø 125 mm.
• Minimum consumption: from 6.5 W-Th-C.
• Low acoustic level: From 31 dB (A).
• Ø 160 mm discharge, compliant with the new hygro regulations.
• Easy installation and maintenance.

Compliance

• CSTB Technical Notice: No. 14.5/17-2266.
• WEEE electrical recyclability
• Eligible for CEEE (energy saving certificates)
• Complies with ErP regulations
• Designed and made in France

Technical characteristics

Overall dimensions and dimensions: