Bubendorff centralized 10 Nm radio motor + remote control for BLOC range with shutter SN number

The Bubendorff BLOC range of shutters are the shutters delivered directly fitted to the window in the Block Nth, Block Rth or Block Y configuration.

For this shutter range, please indicate your SN number. This is because we systematically check with Bubendorff that the motor you have chosen is compatible with your shutter. With the 16-digit SN number written on the end blade of the shutter, we can give you the pulling force of the motor and its connection.

How can I be sure that my shutter is part of the BLOC range?

If the 3rd digit of your SN number is a "4" then your shutter is a Bubendorff BLOC shutter, if it is any other number it is a different shutter range and you are on the wrong product sheet.

Additional tips:

You can disassemble your shutter motor before ordering and compare the motor connection with the image on the product sheet. The motor pulling force is written on the motor.

Additional information CI motor 10 Nm:

• Reference 221008
• BUBENDORFF radio motor with individual control type CI
• Pulling force: 10 Nm
• Radio remote control and centralization via powerline protocol (PLC) possible
• Automatic limit switches
• Head shape: drawer - 2.0 connectivity
• Delivered with its wall-mounted radio transmitter (223019). Note: the CI radio motor works exclusively with a radio ID transmitter labelled with the same S/N.

Additional information RG 10 Nm engine:

• Reference 221021
• BUBENDORFF radio motor with grouped control type RG
• Pulling force: 10 Nm
• Automatic limit switches
• Delivered with 2.50 m cable containing 2 conductors (brown, blue)
• Delivered with its wall-mounted radio transmitter (223019). Note: the RG radio motor works exclusively with an ID radio transmitter labelled with the same S/N.
• Compatible with the additional transmitter (226001), ID2 clock (229026), 5-channel transmitter (229017) and universal interface (229018).

How to ensure which motor pulling force to choose?

The RG motors are currently available in 10 Nm, 25 Nm and 33 Nm pulling force. If it says 6 or 10 Nm on your motor, you can be sure that the 10Nm motor will be suitable. If it says 20 or 25 Nm you can go for the 25Nm motor and if it says 30 or 33 Nm then go for the 33 Nm.

It is not advisable to take a higher pulling force than the one that is in place. In fact, as the motor stops by stressing the top and bottom struts, there is a risk of breaking the shutter attachments (known as automatic locks) on their axles, or even damaging the shutter blades.
If, however, you want to increase the pulling force of the motor, you should add a pair of automatic locks to your order.

If you have any doubts about the motor pulling force in place, please do not hesitate to send us a request with the SN number of the shutter either through the chat (bottom right) or with our form.

How to replace the RG radio motor?

All disassembly and assembly steps are given in the instructions downloadable in the "Attachments" tab.

What are the warranty conditions for Bubendorff roller shutter motors?

The warranty is valid for 5 years from the date of invoice of the motor. If your motor requires a warranty claim you can contact our services, the motor must then be returned with its transmitter. You must first make sure that the motor has not been pierced or has not suffered an electrical surge. Indeed, in the last 2 cases mentioned, it is not a motor defect, and the manufacturer will not apply the warranty.

This motor seems longer than the one I currently have, is it compatible?

No worries, this model of motor is indeed compatible with your shutter, you will just have to drill the metal shaft further to rivet it. But be careful not to drill the motor because in this case the warranty would be inapplicable.

Is the motor sold with its remote control, will my old control still work?

All Bubendorff radio motors are sold with a transmitter pre-paired with the motor at the factory, your old transmitter will not be able to control this new motor in any way, and if you need an additional control you will need to add to your orderan additional removable transmitter.

Is there a special commissioning setting on this model?

No, powering up and setting the shutter to the upper and lower stop will allow it to initialize itself, if you do not want the shutter to stop on the upper stop automatically, it will then be possible to set it (only the upper stop is configurable).
The steps for adjusting the top stop are available in the manual which can be downloaded from the "Attachments" tab.