How to install an external venetian blind in thermal insulation from the outside?

For this type of installation, you choose the built-in brise-soleil , because normally your BSO will be hidden in the thickness of the insulation if it is at least 160 mm.

Our installation tips

Be careful , this will inevitably generate a thermal bridge. Otherwise, you can put 20 mm of insulation between the bracket and the wall, and take a BSO with a closing sheet.

For installation on the facade in thermal insulation from the outside, the bracket that holds the pack of slats will be fixed to the facade above your window frame.

• The total height of your external venetian blind when ordered will be equal to:
  Height of your finished frame /painting/window hole to which we add the "Height of the box" (see the image above).
  Because the total height of the BSO to order is indeed equal to the visible part + the hidden part in the ITE.
  
  In this configuration, you will need at least a thickness of insulation of 160 mm: 140 mm square + at least 20 mm of insulation in front on which you will put the coating.

• With the "Wall mounting guide": The width of your external venetian blind will be equal to the width of your finished painting minus 5 mm .
  The "Wall mounting guide" must be used, but be careful to choose the appropriate plug that will receive the screw. You must apply your BSO after redoing your coating.