- Back to top
- Description
- Video
- Options details
- Features
- Customer reviews
Adjustable pergola slats with aluminum structure without posts.
Create your own made-to-measure pergola with this blade kit and its aluminum frame to be placed on posts or placed between two load-bearing walls. |
|---|
In all cases, the price includes: the aluminum frame, the slats, the control transmission mechanism, the motor and its Somfy RTS or IO-homecontrol radio control.
The kit comes with two gutters to drain the water that runs over the slats when they are closed. The gutters are not drilled at their ends so you will have to adjust the system to your situation. |
Adjustable slat system for pergola suitable for all conditions |
|---|
How tight are the blades?The extruded aluminum and stainless steel slats of the structure offer the possibility of varying the angle of inclination using the wheel of the supplied remote control. The shape and joints of the slats ensure perfect sealing of the structure. When the slats are closed, the water drains on both sides at the end of the slats if you have not set a slope.
|
Choosing the right adjustable blades
To be accompanied free of charge in the choice of your installation, our team is at your side.
Complete your request in a few clicks and within 24 hours maximum, we will get back to you.
Adjustable pergola slats designed to withstand all weather conditions.
The blades are an extruded aluminum profile cut to the right length according to the dimensions of your supporting structure.
Unlike S blades, which are a simple folded sheet, this aluminum profile is very resistant and will easily withstand a few tens of cm of snow.
In the event of heavy falls, we advise you to put the blades vertically to let the snow pass.
How much snow can the pergola handle? |
|---|
We have selected this profile of extruded blades because we believe it is much stronger than the S or Z blades which can be a simple sheet with an axis. When all the blades are closed, they press against each other to form a strong compact assembly. If you have 1 m of snow on your pergola, it will weigh approximately one tonne per m² which will of course cause your supporting structure to bend or tear the supporting rails fixed to the roof.s sides, but in no way will this snow bend the blades. We advise you in the event of heavy snowfall on your adjustable slat apron, to leave the slats open to avoid too much accumulation on top. This situation would be quite exceptional. So don't worry, this very simple pergola in its mechanism is a reliable and durable covering element, to protect your terrace, your garden furniture, sofa, etc. |
How to choose the orientation of the blades of your pergola? |
|---|
|
If, for example, you have your house on the right and facing south at the front, we recommend a clockwise orientation . In the middle of the afternoon, you can open the blades to let the light pass through. The sun's rays will be blocked and you will be protected. | |
|
What engine comes with the blades? | |
|---|---|
The motor delivered is a wired motor on which we have just put an RTS slim adapter to transform it into a radio motor. With the supplied remote control, you will be able to define a favorite position using the "My" button. The motor must be placed on the beam on the right or on the left. You can order without motorization, but in this case you will have to make your own system, to activate the upper rod which connects all the blades. For example with a cord and pulleys, you should get there. And if it doesn't work, you can recommend the engine later. | |
|
|
| Section of the gutter to collect rainwater from the pergola: |
|---|
The gutter must be placed on each side at the end of the blades. look at the photo report below to better understand its position.
It would normally take a slope of 1%, or 1cm every meter, for the water to flow. However, if your pergola is 6m long, there would be a 6cm gap between one side and the other, which would not be very pretty. We therefore advise you to offset 1 or 2 cm between the front and the back so that this slope is not perceptible to the eye seen from below. Given the large amount of water that will be collected, it will flow anyway even with this low slope. |
| Possibility of delivery in Europe |
We can deliver your bioclimatic pergola to many European countries but also to Switzerland. To find out if we can deliver to you, you can consult the list of available countries by putting the product in the basket and then selecting the option "Calculate the shipping cost". Just remember to indicate the correct country of delivery when placing the order. |
| Choosing the right adjustable blades |
To be accompanied free of charge in the choice of your installation, our team is at your side. Complete your request in a few clicks and within 24 hours maximum, we will get back to you. |
Orientation des lames de pergola
Options Details
Elero motor with Situo 1 IO pure control from Somfy
Elero motor with Situo 1 IO pure control and Ondeis rain sensor from Somfy
The blades will rotate clockwise when standing outside the pergola and looking at the left side.
So if the facade of your building is towards the rear, your slats open from the back to the front.
With 45° slats, the sun's rays will be blocked by the slats.
This orientation is ideal for pergolas located in regions south of Lyon, where solar gain in winter is not necessarily necessary to warm your main room.
The blades will rotate counterclockwise when standing outside the pergola and looking at the left side.
So if the facade of your building is at the back, your slats open from front to back.
With the 45° slats, the sun's rays will be able to pass through mid-season and thus enter your home if your pergola faces south, and if your slats are parallel to the facade.
This orientation is ideal for pergolas located in regions north of Lyon, where solar gain in winter is necessary/desired to warm your main room.
Prix unique
REMARQUE :
Si le circuit total LED > 12 m l'alimentation doit être partagée en 2 sections.
(au point de sortie du câble )
Barre longitudinale
Barre transversale
Between 1400 and 2500 mm wide :
- 4 spots between 1400 and 3400 mm of projection
- 6 spots between 3600 and 5200 mm of projection
- 8 spots between 5400 and 7000 mm of projection
Between 2750 and 5000 mm wide:
- 6 spots between 1400 and 3400 mm of projection
- 9 spots between 3600 and 5200 mm of projection
- 12 spots between 5400 and 7000 mm of projection
- Classe 6 - 90 km / h
- Yes
No reviews found
You have a question ?