- Back to top
- Description
- Documentation
- Video
- Options details
- Features
- Customer reviews
Transversal double bioclimatic pergola
Advantages
-
If your terrace is too long for a single pergola, a second pergola connected to the first can cover the remaining few meters.
-
This double pergola allows a subtle separation between two spaces with the possibility of directing the blades of two different pergolas.
Technical characteristics
-
A projection of each pergola module of 7000 mm maximum
-
An average height of 2800 mm
-
Compatible with our sliding panels and roller blinds
-
Radio engine delivered with its compatible Io or RTS remote control
150 x 150 mm square posts |
150 x 290 mm slat support bar |
|
Water evacuation system in two of its posts
Dimensions of the pergola gutter sectional view
Sections of pergola posts without gutter |
---|
Sections of pergola posts with gutter |
---|
Dimensions of the last pergola plank seen in section
Gutter details
Detail 1 |
Detail 2 |
|
Detail 3A |
Detail 3B |
|
Detail 3A |
Detail 3B |
|
Detail 3A |
Detail 3B |
|
Blades 60 mm thick for 266.5 mm wide and a length of up to 5000 mm
A pitch of 250 mm between each blade
Adjustable slat system for pergola suitable for all conditions
How tight are the blades?
The extruded aluminum and stainless steel blades of the structure allow the angle of inclination to be changed using the wheel of the supplied remote control.
The shape and joints of the slats ensure perfect sealing of the structure.
When closing the pergola, the water will be drained from both sides at the ends of the slats if you have not added a slope.
Adjustable pergola slats designed to withstand all weather conditions.
How much snow can the pergola handle?
Aluminum blades are stiffer than simple S or Z bent plates.
When closed, the blades form a strong, force-resistant shape.
This pergola is designed for outdoor use.
However, it is recommended to place the blades vertically when the snow is heavy (more than 10 cm) because the weight of the snow can damage the blades.
How to choose the orientation of the blades of your pergola?
If, for example, you have your house on the right and facing south at the front, we recommend a clockwise orientation .
In the middle of the afternoon, you can open the blades to let the light pass through. The sun's rays will be blocked and you will be protected.
What engine comes with the blades?
The motor delivered is a wired motor on which we have just put an RTS slim adapter to transform it into a radio motor.
With the supplied remote control, you will be able to define a favorite position using the "My" button.
The motor must be placed on the beam on the right or on the left.
- linear motor Elero power 1200N
- engine mount
- guide bracket
- M8 screw
- strand 20 x 20 x 2 mm
- blade tip (propellant)
Possibility of delivery in Europe
We can deliver your bioclimatic pergola to many European countries but also to Switzerland.
To find out if we can deliver to you, you can consult the list of available countries by putting the product in the basket and then selecting the option "Calculate the shipping cost".
Just remember to indicate the correct country of delivery when placing the order.
Options Details
Elero motor with Situo 1 IO pure control from Somfy
Elero motor with Situo 1 IO pure control and Ondeis rain sensor from Somfy
The blades will rotate clockwise when standing outside the pergola and looking at the left side.
So if the facade of your building is towards the rear, your slats open from the back to the front.
With 45° slats, the sun's rays will be blocked by the slats.
This orientation is ideal for pergolas located in regions south of Lyon, where solar gain in winter is not necessarily necessary to warm your main room.
The blades will rotate counterclockwise when standing outside the pergola and looking at the left side.
So if the facade of your building is at the back, your slats open from front to back.
With the 45° slats, the sun's rays will be able to pass through mid-season and thus enter your home if your pergola faces south, and if your slats are parallel to the facade.
This orientation is ideal for pergolas located in regions north of Lyon, where solar gain in winter is necessary/desired to warm your main room.
Prix unique
REMARQUE :
Si le circuit total LED > 12 m l'alimentation doit être partagée en 2 sections.
(au point de sortie du câble )
Barre longitudinale
Barre transversale
Between 1400 and 2500 mm wide :
- 4 spots between 1400 and 3400 mm of projection
- 6 spots between 3600 and 5200 mm of projection
- 8 spots between 5400 and 7000 mm of projection
Between 2750 and 5000 mm wide:
- 6 spots between 1400 and 3400 mm of projection
- 9 spots between 3600 and 5200 mm of projection
- 12 spots between 5400 and 7000 mm of projection
- Classe 6 - 90 km / h
- Longitudinale ,
- Leaning
No reviews found
You have a question ?