RG radio motor - 10 Nm

Bubendorff reference: 221021 (right motor) / 221029 (left motor) - for CLASSIC, DESIGN, NELTO range

100% original Bubendorff spare part

BUBENDORFF radio motor with group control type RG
Torque: 10Nm
Automatic limit switches
Supplied with 2.50 m cable containing 2 conductors (brown, blue)
Delivered with its wall-mounted radio transmitter (223026). Note: the RG radio engine works exclusively with an ID radio transmitter labeled with the same S/N number.
Compatible with additional transmitter (226001), ID2 clock (229026), 5-channel transmitter (229017) and universal interface (229018).

Note: this motor can replace FG and MG motors which are no longer manufactured by Bubendorff.

Is the RG radio engine centralizable?

Yes, and that's where it's at. It works with the radio protocol and the carrier current protocol (CPL). It can therefore be adapted to all centralized installations whether they are radio or wired.

Centralization can be managed with one of the following Bubendorff radio remote controls:

Can the RG radio motor replace a wired motor?

Yes, the RG radio motor can replace a wired motor. It is moreover the motor to be taken to replace a wired motor of a centralized installation (in particular wired motors of the FG type with 3 wires which are no longer manufactured by Bubendorff).
To do this, you must remove the motor inverter built into its wall-mounted electrical box, ensure the electrical connection so that the neutral and the phase go directly to the motor. The 3rd wire can be removed or protected.
If you want to keep the wall switch, an option allows you to take the square radio remote control with a gray or white central square and fix it to the existing electrical box instead of the old inverter.
The steps for switching from a wired FG/MG motor to an R or RG motor are available in the downloadable instructions in the "Attached files" tab

How to be sure of the motor torque to choose?

RG motors are now available in 10 Nm, 25 Nm and 33 Nm torque. If your motor says 6 or 10 Nm, you can be sure that the 10 Nm motor will fit. If it is registered 20 or 25 Nm, you can take the 25Nm motor and if it is registered 30 or 33 Nm then orient yourself on the 33 Nm.

It is not advisable to take a torque higher than that which is in place. In fact, as the motor is stopped by force at the level of the high and low stops, you risk breaking the fasteners of the apron (called automatic locks) of the shutter on their axis, or even damaging the slats of the apron.
However, if you want to increase the torque of your motor, remember to add one or two pairs of automatic locks to your order.

If you have any doubts about the engine torque in place, do not hesitate to send us a request with the SN number of the shutter either by chat (bottom right) or via our form.

How to replace the RG radio motor?

All the disassembly and assembly steps are given in the downloadable instructions in the "Attached files" tab.

What are the conditions of application of the guarantee on Bubendorff roller shutter motors?

The warranty is valid for 5 years from the engine invoice date. If your engine requires a warranty claim, you can contact our services, the engine must then be returned with its transmitter. You will need to make sure beforehand that the motor has not been punctured or has not suffered an electrical surge. Indeed, in the last 2 cases mentioned, it is not an engine fault and the manufacturer will not apply the guarantee.

This engine seems longer than the one I currently have, is it compatible?

Don't worry, this motor model is compatible with your shutter, you just need to drill the axismetal further to rivet it, be careful not to pierce the engine, the warranty would be inapplicable.

Is the motor sold with its remote control, will my old control still work?

All Bubendorff radio motors are sold with a transmitter previously paired in the factory with the motor, your old transmitter cannot under any circumstances control this new motor, and if an additional control is needed, a transmitter must be added to your order. additional removable.

Is there a particular commissioning setting on this model?

No, powering up and setting the shutter to the upper and lower stops will allow it to initialize on its own, if you do not want the shutter to stop automatically at the upper stop, it will then be possible to configure it (only the top stop can be configured).
The upper stop adjustment steps are available in the downloadable instructions in the "Attached files" tab.

Direction of motor rotation reversal (download)

Motor connection F & R & RG Bubendorff (download)

Connection Universal Motor Interface R and RG (download)

Replacement of Powerline carrier motor by R or RG AND Reverse direction of rotation (download)

Specifications Bubendorff engines (download)

Notice Replacement Motor FG-MG by R (download)

4.9 out of 5

Reviews

Stars

87%

Stars

13%

Stars

0%

Stars

0%

Stars

0%

Anonymous

23/07/2023, 12:22

Advantages

très bien merci à l équipe

Disadvantages

pas d'inconvénient

Comment

je l' ai installé sans souci

dominique Lefébure

28/03/2023, 20:47

Comment

très satisfait de l'échange du moteur, livraison parfaite reçu ma commande le lendemain avant 13h, remplacement facile et j'ai été très bien conseillé, vraiment parfait je recommande le site de Lacentrale eco

Marchadour Jacques

19/01/2023, 18:36

Advantages

Que des avantages. De la commande, du contact (Pierrick) très opérationnel et professionnel, du suivi et de la livraison, aucun souci .
Merci

Disadvantages

Pas d’inconvénients

Comment

Sans commentaires

Vendor's response

Nous sommes ravis de lire que vous avez apprécié votre expérience avec nous de la commande à la livraison. Nous sommes heureux que vous ayez trouvé notre contact, Pierrick, opérationnel et professionnel. Merci pour votre confiance et votre soutien

Anonymous

13/10/2022, 08:42

Advantages

Livraison rapide . Simple à monter

Disadvantages

Prix élevé

Comment

Conforme à mes attentes

Vendor's response

Bonjour, Merci pour votre avis. Nous nous efforçons de proposer les meilleurs prix du marché, malgré les augmentations de l'industriel en 2020 et 2021. Bonne journée

COAT Jean-François

10/08/2022, 19:09

Advantages

Bons renseignements Produit conforme
Très satisfait

Comment

Bons renseignements Produit conforme Très satisfait

Julien L.

10/05/2021, 07:50

Comment

Conseil rapide et professionnel pour trouver un modèle compatible avec le mien datant de plus de 10 ans,
Réception rapide et très bien protégé, le moteur marche parfaitement.

FrancoisB

28/04/2021, 19:10

Comment

Excellent service pour trouver le bon produit, envoi conforme et très rapide.
PARFAIT et merci à l'équipe.

Eric de GOLBERY

08/04/2021, 14:17

Comment

Seconde commande de moteur RG avec télécommande, produit conforme et livraison rapide. Installation facile du moteur de même que la programmation en commande groupée avec ancien moteur à courant porteur. Merci aussi à l'assistance qui répond toujours rapidement aux interrogations que l'on peut avoir.

Stephane GOLLION

29/03/2021, 08:38

Comment

2 ème commande pour 2 moteurs de volet roulant (3 en panne), comme la 1 ère fois, parfait, rien à redire, rapidité, conformité. Je recommande. Merci.

Sébastien

26/03/2021, 07:05

Comment

Moteur reçu très rapidement, les conseils de l'équipe pour nous aider à choisir le bon modèle est au top.

Parlons en ensemble

Vous ignorez quelle référence Bubendorff choisir ? Demandez à notre équipe (réponse en 30 min)

j'identifie la pièce Bubendorff

RG radio motor - 10 Nm + its Bubendorff remote control

Questions sur les pièces détachées Bubendorff