5-channel remote control (ID2) - 229017 - Bubendorff

5-channel remote control (ID2) - Bubendorff

Bubendorff reference: 229017 - 5-channel remote control (ID2)

This remote control is compatible with all new Bubendorff radio shutters that you will buy on the site.

It can control up to 5 individual shutters or 5 groups of 20 shutters maximum.
If you want to simulate presence, we advise you to take the Bubenborff clock .

If you already have shutters, this remote control is compatible with all radio shutters manufactured since 2014. (R and RG 2014 motors with adjustment of 2 intermediate positions from 04/2014).

Bubendorff roller shutter 5-channel transmitter

1. Using the transmitter

• The transmitter can control up to 5 different shutters or groups of shutters.
• 30 shutters maximum per installation
• Selection of the channel to be controlled using the button.
• Control up (▲), stop (■), down (▼).
• Possibility of programming 2 intermediate positions (A and B).
• Indicator light that activates briefly with each press.

2. Security

• Indoor use only.
• Do not allow children to play with the control devices.
• Discontinue use if needed for repair or adjustment due to wear.
• Do not use during maintenance, replacement of parts or service.
• Device usable by children aged 8 and over under supervision.

3. Association of the transmitter with the shutters

• Select the channel in which the shutter must be integrated.
• Press ▲ twice for association.
• Validate the association with the main transmitter.
• The number of short acknowledgments of the shutter corresponds to the total number of associated transmitters.

4. Adjusting intermediate positions

• Bring the shutter(s) to the desired height with any associated control point.
• Select the channel corresponding to the shutter (or group of shutters).
• To memorize position A, press A for at least 3 seconds.
• To memorize position B, bring the shutter(s) to the desired height, then press B for at least 3 seconds.

5. Technical characteristics

• Powered by 1 CR2032 type lithium battery (supplied).
• 868 MHz radio frequency.
• Radio range of 100 meters in free field (may be altered depending on the installation conditions).
• Operating temperature: +5°C to +40°C.
• Storage temperature: -10°C to +70°C.
• Dimensions: 45 x 125 x 15mm.

6. Setup

• Maximum number of channels: 5.
• Maximum of 30 roller shutters per installation.
• To include a channel, press ▲ (IN is displayed).
• To exclude a channel, press ▼ (OUT is displayed).

Note : The transmitter complies with the essential requirements of directive 1999/5/EC. The CE declaration of conformity is available on the Bubendorff website.

100% original Bubendorff spare part

for ID2, R, RG motor (radio protocol type)