How can I combine logs and pellets to heat my home?
Here is a product that has been proven for more than 10 years in Italy, which will allow you to use both logs and pellets to heat your entire house.
This device is a real boiler, which diffuses energy through an air or water network.
That's why we call this type of dual-fuel fireplace: "room boiler"
For the same price as a classic pellet boiler, offer yourself the aesthetics of a log fireplace and the comfort of self-feeding pellets!
We invite you to discover the entire FOGHET , FOGO range.
"FOGHET" with curved or flat front is a water heater approved and tested according to the European standards EN13229, EN14785,EN303/5 and German DIN18894, DIN18891, DIN18892.
It works with wood or wood and pellets (ALTERNATIVE AND RENEWABLE ENERGY).
Designed according to the requirements of today's modern market:
- energy saving,
- comfort and
- environmental protection.
This appliance is the result of thirty years of experienceJolly-Mec in the heating sector.
Foghet is a monobloc consisting of a double-walled special steel heat exchanger with a special profile.
This special construction allows full advantage to be taken of the heat produced by combustion.
This results in efficiencies up to 92.74%, which places this appliance at the top of its class in terms of efficiency and demissions of burnt material.
Foghet with domed or flat front can be declined as a fireplace or stove (model "FOGO"); with flat front as a fireplace or stove (model "FOGHEA").
Foghet with curved front is equipped with an electronic control panel (which comes in two versions: standard or simplified) for the management of the stove for both wood and pellet operation.
Both versions are proposed with the built-in chrono thermostat for automatic switch-on and switch-off.
If the latest generation simplified electronic control panel is programmed, when the wood is no longer burning, the temperature sensor in the event of a heat demand automatically switches the operation of the wood stove to pellets with automatic ignition of the latter, while maintaining the desired temperature.
The simplified electronic control panel emits an audible signal when the pellets are finished.
In addition, it can be used to control an additional pellet tank or a parallel boiler, a sanitary storage tank or a thermal cell and the circulation pump of the heating system.
Finally, the simplified electronic control panel allows a check-up of the various components even when the stove is switched off.
Foghet with flat front panel is supplied only with the simplified electronic control panel.
Fueled by wood, it works like a traditional fireplace or stove, but with the added benefits of controlled combustion thanks to the Caldo Control system: a Jolly-Mec patent, which optimizes combustion according to the water temperature.
Thanks to the application of the special JOLLY ME-04-F pellet burner, Foghet becomes a continuous-fire heater, similar to a boiler.
The pellet tank capacity is 46 kg approximately. However, to achieve greater operating autonomy, an additional tank with a larger capacity can be provided, which can be installed in another room.
The conversion from wood to pellet operation, or vice versa, is done very quickly: by simply moving the grate placed on the burner basket and selecting the desired type of feed.
With pellet operation, it is possible to manage the power through the supplied electronic control panel: from 8,000 kcal/h at min. power, up to 20,000 kcal/h at maximum output. It is possible to buy Foghet operating only on wood and then apply the burner as the unit is already predisposed to receive this component.
Foghet is equipped with a wide ceramic glass door.
The wood-pellet model with curved front offers, as an option, a second small removable inner glass door, so that it can be used as a boiler:
- easier cleaning,
- always keeps the glass of the wide outer door clean
- decreases the temperature of the front.
To use Foghet as a fireplace, it is possible to remove the small door and store it in its storage box (optional).
Foghet with water circulation can autonomously heata house with a surface area of up to 170m2 (by radiator network, underfloor heating, storage, etc.
Foghet is supplied as standard with a closed expansion vessel hydraulic kit already assembled and tested, with or without ECS production and a cooling exchanger that controls and manages the water temperature in the event of a power failure.
On request (not supplied as standard), Foghet can also be supplied with a hydraulic kit for open expansion vessel operation, with or without ECS production.