Products

How to regulate your infrared heating?

Long-wave infrared heating has real advantages for the comfort and well-being it provides.

That's what convinced you and you're right!

However, some infrared products do not have built-in regulation.

These are "all or nothing" products.

This is why it will be necessary to add a regulation system to optimize the operation of your infrared panels.

 

Starting from the regulation that we use on a daily basis in the store area of lacentrale-eco, we offer you 2 scenarios, to regulate your installation.

These are valid solutions, whether you have panels on the wall or ceiling lights:

  1. Classic regulation
  2. Regulation connected by smartphone

 

1. Classic/traditional regulation of your infrared heating

 

You will need to equip:

  • From a radio receiver
  • From a thermostat

 

The Deltadore REF6620 - 6050638 receiver :

This receiver will fit:

  • Either in your electrical panel on the direct line that will power the panel
  • Either in the partition at the rear of the radiator, if this allows it.

 

The size of the receiver is a bit substantial: H 120 x W 54 x D25 mm.

The role of the receiver is to cut off or give power to the panels.

It must receive either the order from a thermostat or from a home automation box.

 

Features:

GUARANTEE 5 years
POWER TYPE Sector
FEED 230V
PLACE OF USE Interior
RADIO RANGE 100m
REGULATION IP, ToR
OPERATING TEMPERATURE max 40°C
DIMENSIONS H 120 x W 54 x D 25 mm

DELTADORE 6620 RF Radio Receiver Manual

 

The classic Delatador thermostat TYBOX 5101 BK - 6300052 :

 

This will allow you to control and regulate your temperatures serenely with a control screen.

 

Features :

GUARANTEE 5 years
POWER TYPE Battery
BATTERIES SUPPLIED 2 Alkaline LR03
PLACE OF USE Interior
RADIO RANGE 100 to 300m
DISPLAY TYPE LCD
OPERATING TEMPERATURE -10°C to 40°C
DIMENSIONS H 84 x W 80 x D 21 mm

Thermostat Tybox 5101 BK DELTADORE manual

 

2. Connected regulation via smartphone of your infrared heating

You will need to equip:

  • From a receiver
  • A temperature sensor
  • From a home automation box

 

The Deltadore REF6620 - 6050638 receiver :

This receiver will fit:

  • Either in your electrical panel on the direct line that will power the panel
  • Either in the partition at the rear of the radiator, if this allows it.

 

The size of the receiver is a bit substantial: H 120 x W 54 x D25 mm.

The role of the receiver is to cut off or give power to the panels.

It must receive either the order from a thermostat or from a home automation box.

 

Features:

GUARANTEE 5 years
POWER TYPE Sector
FEED 230V
PLACE OF USE Interior
RADIO RANGE 100m
REGULATION IP, ToR
OPERATING TEMPERATURE max 40°C
DIMENSIONS H 120 x W 54 x D 25 mm

DELTADORE 6620 RF Radio Receiver Manual

 

The Deltadore TYDOME HOME - 6700116 home automation box:

Thanks to the home automation box, you can program operating time slots for your radiators.

You will have more optional amplitude than with a thermostat.

 

Features :

GUARANTEE 5 years
POWER TYPE Sector
FEED 230V
PLACE OF USE Interior
RADIO RANGE Up to 300m
DISPLAY TYPE Without
OPERATING TEMPERATURE -10°C to 40°C
DIMENSIONS H 100 x W 100 x D 26 mm

Notice Tydom Home DELTADORE

 

The Deltadore MINOR 1000 - 6151058 temperature probe:

This will allow:

  • To communicate the temperature to your box.
  • Regulating your heating.

You can place it in the most appropriate place in the room.

Notice Temperature sensor MINOR 1000 DELTADORE

 

You now know how to equip yourself to have good heating regulation, bringing you much appreciated tranquility and comfort.

We wish you a good installation and a good experience!

To the main pageNext article