How to program the preferred position of a Bubendorff roller shutter?

Welcome to this guide on programming the preferred position of a Bubendorff roller shutter! When you have a motorized roller shutter, it is possible to program a specific position so that it stops automatically at this location.

What is the preferential position for?

It's very simple, it allows you to save a personalized position for your Bubendorff roller shutter .

Concretely, you program an intermediate position, at a predefined level.

It can be operated by simply pressing the dedicated button on your remote control .

To reach this preferential position, press this Bubendorff button only once.

Which engines allow this personalized programming?

Valid only for solar, hybrid and R motors .

Does not work on RG, CI and wired engines. for the RG and the CI, the Bubendorff button has no particular function, it cannot be configured.

The function does not exist on wired motors.

Also note that on shutters with adjustable slats, the Bubendorff button has a different function: it is used to close the shutter with the slats open.

Find the instructions for Bubendorff remote controls

What are the remote controls with the Preferential position function?

Two Bubendorff models have this functionality: there "3 buttons" as well as the programmable 5-channel remote control.

3 button remote control

This transmitter is today the most widespread. It looks like this:

The button to activate your favorite position is the bottom one, with the brand name on it (Bubendorff)

How to program the preferred position with a 3-button remote control?

NB: Before starting, we must deactivate the intelligent piloting : we simply have to press the Bubendorff button for 4 seconds . The LED on the transmitter turns red.

1. Take your remote control
2. Lower (position) your shutter to the desired position
3. Press the button for more than 6 seconds
4. The flap will shake to justify acknowledgment (position recorded)
5. Carry out a test by raising the shutter
6. Press the Bubendorff button to verify that it works correctly. It will move to the saved position
7. Relaunch the procedure if necessary.

In the case of solar motors, the shutter will make an acknowledgment in two stages

First, it goes up/down a few centimeters. Then a second pidentical phase will take place: the position is recorded.

For the other motorizations, the acknowledgment is done in a single phase.

5 channel remote control

This transmitter , more advanced, can manage up to 5 groups of shutters, but also to program two personalized positions.

For this remote control, it's very simple:

• Memorization of position A: Press button A for 3 seconds: the shutter will move (acknowledgment has taken place)
• Storing position B: Move the apron to the desired position (which is different from position A) then press button B for 3 seconds.

Position B must have been activated beforehand with the main transmitter. If in any doubt, refer to the instructions .

Preferential position for your shutters

For Bubendorff shutters, it allows you to program a position to allow the passage of air. So you register a certain opening to let the air circulate.

The programming is identical. To use the position, briefly press the button (less than 0.5 seconds).

How do I access my preferred position with an inverter?

Does your house have shutters with hybrid radio/wired motorization, with remote controls and inverters?

In this case, the programming will always be done with the remote control. If you want to go to the preferred position with the inverter, the method is simple:

1. Simultaneously press the Down and Up buttons for less than 0.5 seconds
2. Then, make a short press on Down

Conclusion :

Our team is at your disposal to improve your comfort and make the most of your Bubendorff roller shutters. Discover all of our articles on the subject .