Press 8 to call 07.56.28.59.93
- Back to top
- Description
- Features
- Customer reviews
Fixing anchors or steel deck roof pullers and more generally corrugated sheet metal roofs make it possible to fix the rail that supports the sensor to the roof while maintaining the sealing of the roof.
Description of Corrugated Roof Anchor:
For the installation of the fixing anchors, the realization of a trimmer is necessary.
Installation of corrugated sheet metal roofing screws
We use at least 4 anchors for 1 sensor, 8 anchors for 2 sensors and 12 anchors for 3 sensors.
The distance between the rails must be 1 m for horizontal mounting and 0.70 m for vertical mounting, to be adjusted according to the pitch of the roof.
The sensors are fixed on the rails thanks to the low and high legs.
The threaded rods used for mounting on ribbed or corrugated plates are positioned at the top of the wave and fixed to the structural purlins, having taken care to set up a bridge under the wave in order to avoid its deformation. to tightening.
The EPDM seal is placed between the bottom washer and the top of the corrugation in order to ensure the tightness around the hole
- Self-draining
- Underpressure
- Overlaying roof
No reviews found
You have a question ?