Press 8 to call 07.56.28.59.93
- Back to top
- Description
- Documentation
- Features
- Customer reviews
The connection of the copper solar collector outputs cannot be done by welding or brazing, otherwise the collector will be damaged.
The assembly is carried out cold either by brass olive fittings or by the specially designed Solar-connect synthetic connections patented by Heliofrance.
The specific “HF-SolarConnect” fittings are made of preformed silicone tubes, reinforced with aramid fibers.
They have a thickness of 5 mm. They are only suitable for self-draining installations, whose primary circuit has a vent to atmospheric pressure.
Heliofrance synthetic T or L shaped connections are semi-rigid and longer than olive fittings and are therefore easier to install.
Setting up Heliofrance solar-connect connections
The fittings are to be mounted on the previously degreased sensor connections and the brass inserts must be removed.
The pressure retaining collars must be crimped using the appropriate pliers (supplied on request).
- Self-draining
- Overlaying roof ,
- Flat roof ,
- Slates
No reviews found
You have a question ?