MODUL'EAU plate - 60W UVc sterilizer - Max flow rate 3.71 m3/h

MODUL'EAU drinking water treatment station, 2 filters - 60W UVc sterilizer, domestic range

Treating water with a UV lamp avoids the use of chemicals and does not demineralize the water!

The set consists of:

• 1 UV reactor with CE marking
• 1 MCR type UV lamp and its connector.
• 1 40x4.5 EPDM seal and 1 protected quartz sheath.
• 1 bag for fixing the electrical plate.
• 1 illustrated installation guide

APPLICATION of UV treatment:

• Raw water purification (boreholes, catchments, wells, etc.)
• Rainwater protection (sanitary use only)
• Securing network water

PRINCIPLE of UV lamp treatment:

A purely physical drinking water treatment process, combined with filtration that destroys microorganisms that could cause disease or affect a manufacturing process.
This treatment is carried out by the germicidal effect of UVc rays, eliminating among other microbes, viruses, bacteria and fungi, while respecting the environment.

FILTRATION:

It is advisable to install a filtration system upstream of the turntable to optimize the action of UVc rays.

Technical characteristics of the MODUL'EAU 60 watt UV station:

Permissible flow rate (40 mJ/cm² at 98% transmission) 3.71 m³/h

Treatment room

• UV-C chamber volume 1.6 liters
• Total weight of the packaged device: 4.2 kg
• 3/4'' inlet/outlet not gas
• Material 316L stainless steel
• Working pressure 4 bars
• Max. pressure 6 bars
• Min/max water temperature 0 - 40°C

Electric turntable

• Weight < 1 kg
• Electrical power consumed 62 Wh
• 1 A Fuse Protection
• Supply voltage 220-230V AC –50Hz
• Room temperature 0 - 30 °C

UV-C lamp

• Number of lamps: 1
• Reference PLL 60W lamp
• Germicidal power 19 W UV-C
• Lamp life 9,000 hours

• 316 L stainless steel treatment chamber
• Maximum pressure 6 bars
• Water temperature 0 to 40°C
• Inspection cell view
• Opposite axis connection
• Quartz sheath with curved base
• Mounting plate with integrated electrical box
• Single-ended lamp 9,000 h
• Electronic ballast
• Electromechanical hour meter
• 220 V+T power cord

ADVANTAGES of this UV treatment system:

- Low maintenance cost limited to changing the lamp
- Reliability and safety of use:

• Meets the strictest sizing and design standards for complete disinfection of water intended for human consumption (according to the Ministerial Health circular of January 19, 1987).
• No side effects
• Mineral salt content retained
• No chemical residue generated.

- Optimized packaging

CE and ACS certified, and equipped with a high-quality PHILIPS UV lamp. Made in France.

Consumables and spare parts for Station Modul'eau:

• UVc lamp: 9,000 hours
• Seal: 9,000 hours
• Sheath: 5 years

We work closely with the manufacturer to provide you with advice and validate your approach. We strongly encourage you to contact us to verify the feasibility of your project and the correct sizing of your installation.