TRADI ID4 built-in roller shutter with insulated aluminum slat 368/413 - Bubendorff

You will receive your shutters on one side, and the boxes on the other. This will make it easier for you to install the boxes because there won't be the shutters in there. And then you will install the shutters, once the facade is finished.

The integrated mosquito net is located at the rear of the shutter box, thus offering a simplified maintenance system with easy access.

Availability of option in location #3 .

Recommended measures:

Manufacturing width between 470 and 1600 mm

Manufacturing height between 300 and 2500 mm

Attention: If you wish to integrate your shutter into a Titan 28/28 or 28/30 box, then the manufacturing height must not exceed 2250 mm.

Mains-powered corded motor, supplied without inverter , 4-wire cable, usable length: 1.50 m

You can order the Somfy INIS recessed wired switch (fixed position) to control your roller shutter

Bubendorff mains-powered motor, wired control, compatible with all reversing switches (roller shutter type) on the market

Mains-powered corded motor, supplied without inverter, 4-wire cable, usable length: 1.50 m

With compatible Izymo IO micro-receiver

Stay with wired wall-mounted systems, but control all your Bubendorff shutters from your Tahoma system.

Select the Tahoma home automation box option.

Offer Bubendorff finishes and quality with the Somfy environment.

To control the shutter in radio mode, select the Amy 1 IO remote control option.

Alternatively, select a wired transmitter from our additional remote controls.

Bubendorff mains-powered motor, radio-controlled, supplied with its factory-paired transmitter

Bubendorff mains motor, radio controlled, supplied with its factory-paired transmitter.

Low power consumption.

Compatible with Bubendorff and Zigbee 3.0 systems.

Possibility of automatic control of the shutter in accordance with RE2020.

2-wire cable (usable length of 1.5 m)

Deltadore X3D radio motor + Tryxia 2330 transmitter [IRX]

4-wire cable, usable length 1 m.

Delivered without inverter

Bubendorff motor with mains charging, radio or wired control, operating for 7 days in case of power outage.

Remote report

Bubendorff motor with solar charging and radio control, autonomous for 30 days without sun.

The solar collector (PV panel) must absolutely:
• be positioned outside the dwelling,
• be able to receive direct lighting
• must not be obscured by any object (including, for example: glazing, shutters, balconies, trees, dense hedges, etc.)

Sites with heavy snowfall: the PV panel must be positioned vertically and on the facade.

Control function: the PV panel must be positioned close to the shutter, on the same facade and without shading on the panel.

Winch operation - DP368 blade with underside box exit

∆R = 0.25 m².K/W

This shade is only available for blades with a tinted outer face and a low-emissivity aluminum inner face.

Specify the shade from the expanded color chart in the 'where to install' option or in the notes section once the order has been validated.

The motor comes with its basic remote control, but no additional remote control is included.

The Bubendorff CLIMAT+ control automatically manages your shutters for optimal comfort and energy savings.

It takes into account indoor and outdoor temperature, as well as sunlight for maximum efficiency.

It can control up to 30 roller shutters simultaneously.

4-channel remote control, including 1 with clock - H4C - Bubendorff

The IDiamant with Netatmo module allows you to open and close your shutters remotely, via your smartphone.

Product reference: 229026 - for ID2, R, RG motors (radio protocol type)

The Somfy Inis wired switch allows you to easily control your roller shutters for simple and reliable everyday use.

It offers intuitive control thanks to its up, down and stop buttons, ensuring precise control of your equipment.

Compatible with most wired motors, it can control a roller shutter or a group of shutters depending on the installation.

• Intuitive control: Control your equipment with a simple press using the up, down, stop buttons and the favorite "my" position located on the front panel.
• Advanced customization: Configure your preferences with the On/Off functions, different modes and programs accessible on the back panel.
• Optimal comfort: Activate or deactivate temperature measurement directly from your control point for customized comfort.

Stay with wired wall connections, but control all your Bubendorff shutters from your tahoma system using the Somfy Izymo receiver and the tahoma box.

You can also order the Tahoma Switch box on its own page.