- Back to top
- Description
- Documentation
- Features
- Customer reviews
EUREKA 18 watt drinking water station, domestic range
Treating the water with a UV lamp avoids the use of chemicals, and does not demineralise the water!
APPLICATION of UV treatment:
- Potabilization of raw water (boreholes, catchments, wells, etc.)
- Securing rainwater (sanitary use only)
- Securing mains water
PRINCIPLE of UV lamp treatment:
Purely physical potabilization process, associated with filtration destroying micro-organisms likely to cause illness or affect a manufacturing process.
This treatment is carried out by the germicidal effect of UVc rays, eliminating, among other microbes, viruses, bacteria and fungi, while respecting the environment.
Technical characteristics of EUREKA UV stations:
MODEL | EUREKA 18 |
DEBIT (1) | 0.86 m3/h |
ELECTRIC POWER | 1 x 18W |
FILTERS (x2) | 2 x 9"3/4 |
I/O | 3/4" |
(1) Flow rates above expressed according to a UVc rate of 90 to 98% on a 1 cm water layer for a delivered germicidal dose of 25 mJ/cm2 up to 40 mJ/cm² at the end of lamp life and at the worst point of the device.
- 316 L stainless steel treatment chamber
- Max pressure 6 bar
- Water temperature 0 to 40°C
- Manhole for control cell
- Connection in opposite axis with valves
- Domed bottom quartz sheath
- Fixing plate with integrated electrical box
- MCR lamp 9000 h (Indicator light)
- electronic ballast
- Electromechanical hour meter
- 220 V+E power cord
- Socket for solenoid valve or cell
- Integrated filter holders (cartridges included)
ADVANTAGES of this UV treatment system:
- Presented on an easily removable and transportable stand-alone plate
- Integrated filtration adaptable according to the quality of the water to be treated.
- Low maintenance cost limited to changing the lamp and filter cartridges
- Reliability and safety of use: meets the strictest sizing and design standards for complete disinfection of water intended for human consumption (according to the Ministerial Circular for Health of January 19, 1987).
- Without side effects
- Mineral salt content retained, no chemical residual product generated - Optimized packaging
CE, ACS certified, and equipped with a high quality PHILIPS UV lamp. French made
- The equipment is delivered with the fixing screws and dowels and the valves. The plates are pre-drilled
- Price includes filter cartridges
EQUIPMENT included on the EUREKA UV treatment station:
- An adaptation window for control cell and UVc alarm
- A socket for connecting a hydraulic safety solenoid valve
- A lamp operating hour meter
- An on/off switch
- An electrical protection fuse
OPTIONS for the EUREKA UV Potabilization Station:
- UVC measurement and alarm cell
- Hydraulic safety solenoid valve in the event of a power cut or lamp fault
- Activated carbon cartridges, wound (25,10,5?) and nylon screen.
- Power supply possible via 12 or 24V electric batteries on the EUREKA 18 and EUREKA 36 models (for photovoltaic panels for example).
Consumables and spare parts for EUREKA Turntable
- UVc lamp: 9,000 hours
- Seal: 9,000 hours
- Sheath: 5 years
We work in close collaboration with the manufacturer to provide you with advice and validate your approach. We strongly invite you to get in touch with us, in order to check the feasibility of your project and the correct sizing of your installation.
- 3/4"
- 2 year warranty. The electronics are guaranteed for 1 year.
- Eureka
No reviews found
You have a question ?