Radio engine

Bubendorff Radio engine

Among the different Bubendorff motors , we find different types linked to power supply or control mode: Radio, Solar, Hybrid and Wired

The Bubendorff rolling shutter radio motor is powered directly from the home's electrical network (on the mains). This is also called a motor with a wireless remote control.

The shutter control point issues a command by radio transmitted to the receiver integrated in the shutter motor.

The motors (and therefore the shutter) are controlled by the remote control supplied with the motor. Each motor has unique security, specific between the motor and the remote control, to prevent any hacking attempt.

The radio motors are also compatible with the iDiamant , to program and use them using your smartphone.

Individually controlled radio motor

On this type of motor, the electronic card manages a simple relationship, between a remote control and a shutter. The command is linked to only one to which it can send an order.

Radio engine with group control (RG)

In this case, the command is able to manage a group of panes that you program. This makes it possible, for example, to close all the roller shutters in the house with a single remote control (additional transmitter).

It is not linked to a single component. It allows orders to a group of shutters.

Discover our article: Differences between a Radio engine (R) and a Grouped Radio engine (RG)

Advantages of Bubendorff radio motors

• Automatic end of travel: the motor automatically “adjusts” for maximum ascent and descent.
• Easy installation thanks to the absence of a ground wire: only 2 wires to connect (neutral and phase), with a direct line to the electrical panel
• Compact size: 36 to 40 cm to fit all shutter sizes

Installation of ub radio motor

These motors can be installed on roller shutters:

• Tradi ID, Tradi
• Mono ID, Mono Design
• Block ID, Block N and Block R

Shutter motor warranty

Like other Bubendorff motors, radio motors allow you to benefit from a 5-year warranty.

Procedure for commissioning a Bubendorff Radio motor

1. Cut off the general power supply then turn it back on
2. Make a short press (less than half a second) on the “Down” button: let the shutter go down (adjustment of the lower stop)
3. Short press on the Up button and wait for the shutter to go up completely
4. Repeat the short press on “Down” + lowering of the shutter then short press Up + Raise of the shutter itself.

The operation must be carried out within 40 minutes of the power cut.

How to use your radio remote control?

For a standard roller shutter , it's childish:

• “Raise” button: with an upward arrow, to raise all the blades
• “Down” button: with a downward arrow, to lower the entire apron
• To stop when the shutter is moving: press one of the two buttons mentioned above

centrale-eco.com/images/v5/BUBENDORFF/notice/utilisatio-commande-radio-individualelle.jpg?1677831828887" />

For a rolling shutter with adjustable slats :

The ascent/descent is controlled in the same way. In addition, the orientation of the slats is possible by pressing the descent once the shutter is completely lowered.

How to reset the stops of an R radio motor?

To reset the adjustment of the stops on your radio motor, here is the procedure to follow:

1. If commissioning took place more than 40 minutes ago: cut off the power supply for 7 seconds then reactivate it.
2. Erasing the stops : press the 3 buttons on your main remote control simultaneously for more than 4 seconds. The shutter moves up/down.
3. Then press the "bubendorff" button for more than 4 seconds too. Your shutter goes down
4. Automatic adjustment of the stops : make a short press (less than half a second) on the “Down” button: the shutter goes all the way down (adjustment of the lower stop)
   for the upper stop, briefly click on the “Raise” button. Your shutter will go up to the top.
5. Recording the stops: repeat the same sequence as for automatic adjustment, i.e. a short press on Down, let the shutter go down then a short press on Up

Radio motor: Manual adjustment of the upper stop

1. Press the main transmitter for more than 2 seconds. The shutter will go down. Press the Down button again to stop it approximately where you want it.
2. To adjust the position of the shutter, two possibilities:
   Shutter too low: raise it by simultaneously pressing Up + the Bubendorff button, briefly (less than 0.5 seconds)
   Shutter too high: lower it by simultaneously pressing Down + the Bubendorff button, briefly (less than 0.5 seconds)
3. To memorize the position: for 4 seconds, simultaneously press the Up button + the Bubendorff button

Price of a radio engine

Prices start around €220 (at the time of writing this page in March 2023). Some motors are sold with adapters, which implies a higher selling price.

Whatever type of engine you are looking for, the vast majority are in stock at lacentrale-eco, with delivery possible within 24 hours with our partner Chronopost. Living in the Rhône-Alpes region? Come to Lyon to collect your Bubendorff engine directly . With more than 1000 references available, repair your roller shutter without delay.

Customer reviews on Radio motors

Replacement of a motor on a shutter from 2002, adaptation kit very simple to implement, just need to drill the tube to put the rivet, centralized programming with the old shutters easily done.

"Motors broke down during the Easter weekend. 15 years old, the Bubbendorf motor is no longer manufactured. I am looking for an equivalent motor allowing me to operate the shutter individually and via centralization After having communicated the references of my shutter by email to the site, I received a response on Easter Monday. (Wow, great after-sales service). Product ordered and delivered 48 hours later.
Quick assembly (just the location of the rivet which differs from the previous engine)
I recommend this site!”

"I received the motor for my shutter very quickly, competent and super fast, I have just assembled it and it works very well, I recommend this site"

Engine reviews Bubendorff radio