Infrared heater

The power to choose depends on the room in which you are going to put the radiator but also on your insulation level.  

We calculate the power in relation to the volume of the room and according to its insulation level.  

For example, we advise you to calculate your power for uninsulated rooms: for a bedroom = 25W/m3, living room = 30Wm3, and for a bathroom = 40W/m3.  

For a new RT2012 house we recommend for a bedroom/living room = 20W/m3 and for a bathroom = 25W/m3.  

For a very well insulated passive house, we recommend for a bedroom/living room = 10W/m3 and for a bathroom = 15W/m3.  

Lacentrale-eco has tested this product in many situations. We guarantee the quality of the product and your complete satisfaction.  

Whether it is for a new passive house, an RT 2012 house or as a supplement for a flat, this solution will meet all your requirements!

It is important to understand the notions of comfort and discomfort in a house.  

The infrared radiation emitted by the panel hanging from the ceiling makes it possible to raise the temperature of the elements in the room by a few degrees, which homogenises the temperature of the space by reducing the temperature differences between the elements and the air.  

By reducing the temperature differences you reduce the cold radiation from the elements, which will reduce your feeling of discomfort!  

If you feel cold, it is because your body is feeling cold radiation from the floor, walls or windows.  

The greater the temperature difference between the air and the walls, the more you will feel these differences. With an air temperature of 19 degrees you will feel 21 degrees thanks to the radiation emitted by the panel.  

This notion of comfort and discomfort is the basis for a healthy and comfortable home! Infrared is therefore THE solution to avoid overheating the air while reducing temperature differences.  

This is a measurable physical phenomenon and not a commercial blabla to make you buy this product.

This electric radiator is excellent for low energy houses of Passive House or even RT2012 level, because it is very responsive and without inertia.   It rises and falls quickly in temperature, which allows us to provide the right amount of energy when we need it. The smallest emitters are between 200W and 300W, which is enough for a bedroom or office.

Its ultra-flat design with its glass plate gives it an irreproachable aesthetic aspect! You can put it in an ultra-design kitchen as well as in a living room or a bedroom. Or simply in your office as we did at Lacentrale-eco.com.  

Made in Germany, this infrared radiant panel is of high quality. You can choose to integrate it in your ceiling, hang it from the ceiling or suspend it with cables.

It connects directly to the electrical panel with a standard 220-240V power supply. You must add a regulation to make it work on an all or nothing thermostat, because this infrared heater does not have a pilot wire, nor a remote control.

Its simplicity is also a guarantee of longevity! Given its low power, less than 1500W for most models, many customers install it in place of electric lighting, even though this is strictly forbidden by the regulations, which require a direct connection to the switchboard, but this type of installation allows you to use this electrical point on the ceiling to power it, by putting the wired thermostat instead of the switch.  

Of course, we do not recommend this installation if your electrical network has never been renovated and does not meet current standards.